Fiat · Grande Punto / Punto Evo · 2005-2018

Fiat Punto 1.3 Multijet 75 specs and common problems

A diesel Punto that people looking for an economical city car often consider. The chain-driven 1.3 Multijet is long-lived; at high mileage, check the chain and EGR.

Engine code
1.3 Multijet
Engine oil · 5W-30
3.9 L
Timing
Chain
Original size
185/65 R15
LPG
No

01 / 07

How much oil does the Punto 1.3 Multijet 75 take?

The Punto 1.3 Multijet 75 takes about 3.9 litres of 5W-30 engine oil including the filter. Approval to look for on the bottle: Fiat 9.55535-S1 / ACEA C2.

Engine oil
5W-30
With filter
3.9 L
Approval
Fiat 9.55535-S1 / ACEA C2
Alternative
0W-30
Manual 5-speed
75W-85 · ≈ 1.8 L
Coolant
Paraflu (OAT) 50/50 · ≈ 6 L
Brake fluid
DOT 4

The value may vary by engine version; check with the dipstick.

02 / 07

Timing chain and maintenance

TimingChain

No replacement interval; replaced when stretch symptoms appear

A rattle on cold start signals chain stretch.

Oil change
15,000 km or once a year (10,000 km with DPF)
Glow plug
4 pcs · When they fail
Valves / tappets
Hydraulic tappets.
Fuel filter
30,000 km
Power
75 hp @ 4,000 rpm
Torque
190 Nm @ 1,750 rpm
Displacement
1,248 cc
Fuel
Diesel · Variable geometry turbo, intercooler
Valvetrain
DOHC 16V
Injection
Common-rail direct injection
Transmission
5-speed manual
Emissions
Euro 4 / Euro 5

03 / 07

Tyre size and pressure

Front / Rear
33/33 PSI
Full load
36/38 PSI
Original size
185/65 R15
Alternative sizes
195/55 R16 · 175/65 R15
Bolt pattern (PCD)
4x98
Centre bore
58.1 mm
Wheel
6J x 15
Calculate speedometer error for a size change →

04 / 07

Is the Punto 1.3 Multijet 75 suitable for LPG?

Not suitable, diesel engine
  • Classic LPG conversions are not done on diesel engines.

05 / 07

Punto 1.3 Multijet 75 common problems and fixes

  1. #01

    EGR valve failure

    Medium Risk

    After 80,000 km

    Symptom:
    Rough idle, limp mode, P0401.
    Cause:
    Soot build-up.
    Proper fix:
    EGR cleaning or replacement.
    P0401
  2. #02

    Timing chain stretch

    High Risk

    After 180,000 km

    Symptom:
    Rattle when cold, hard starting, P0016.
    Cause:
    Long oil change intervals and a worn tensioner.
    Proper fix:
    The chain kit and tensioner are replaced.
    P0016

06 / 07

Common fault codes on the Punto 1.3 Multijet 75

07 / 07

Frequently asked questions

How much engine oil does the Punto 1.3 Multijet 75 take?

The Punto 1.3 Multijet 75 (1.3 Multijet) takes about 3.9 litres of engine oil including the filter. Recommended viscosity is 5W-30; look for the Fiat 9.55535-S1 / ACEA C2 approval. Check the level on the dipstick after filling.

When should the timing chain on the Punto 1.3 Multijet 75 be replaced?

This engine uses a timing chain. No replacement interval; replaced when stretch symptoms appear. A rattle on cold start signals chain stretch.

What tyre pressure should the Punto 1.3 Multijet 75 run?

With the original 185/65 R15 tyres, 33 PSI front and 33 PSI rear are recommended at normal load, and 36 front / 38 rear at full load. The exact values are on the door pillar or fuel flap sticker.

Is the Punto 1.3 Multijet 75 suitable for LPG?

Not suitable, diesel engine. Classic LPG conversions are not done on diesel engines.

What are the common problems of the Punto 1.3 Multijet 75?

The best-known problems are: EGR valve failure, Timing chain stretch. The symptoms and fix for each are explained on this page.

Other Fiat models

Doblo 1.3 Multijet 90Egea 1.3 Multijet 95Egea 1.4 Fire 95Fiorino 1.3 Multijet 75Linea 1.3 Multijet 95Linea 1.4 Fire 77

Values are approximate and may vary by engine and VIN. Check against your service manual before doing any work. ·